Air Sampling Pump Accessories
Hach Company Y Strainer Assembly for Hach Process Analyzers
The Y strainer assembly is designed for process analyzers to protect internal components and sample lines by removing suspended particulates and reducing fouling.
- Protects analyzer components by removing particulates from the sample stream.
- 316 stainless steel construction for corrosion resistance.
- 80 mesh screen for effective fine-particle filtration.
- Inline Y form factor for compact installation in sample plumbing.
SKC Inc PUF Replacement, 22-mm diameter x 76-mm length, uncleaned, for Low-volume PUF Tube, 20/pack
SKC precleaned and ready-to-use Low-volume PUF Tubes contain polyurethane foam (PUF) or PUF/sorbent combinations that meet the specifications of EPA and ASTM indoor and ambient air sampling methods for pesticides in homes, public buildings, and offices. DOES NOT ship to Alaska, Arizona, California, Colorado, Hawaii, Idaho, Nevada, Oregon, Utah, Washington. Wyoming”
SKC Inc SORBENT TUBES PUF/XAD-2/PUF
DOES NOT ship to Alaska, Arizona, California, Colorado, Hawaii, Idaho, Nevada, Oregon, Utah, Washington. Wyoming”
Broadley James Corporation OXY II CARTRIDGE, 16PC
16 Piece Cartridge Kit for OxyProbe IIThis convenient bulk pack is the most popular among large volume users. It contains 16 membrane cartridges in one easy-to-store box. Internal o-rings and electrolyte must be ordered separately.* OxyProbe� II replacement parts are not compatible with original OxyProbe� sensors
SKC Inc Tedlar 5-liter Sample Bag with dual stainless steel fittings, 10/pack
Tedlar Air Sample Bags are made from classic DuPont film - the industry standard - with good stability for VOCs, sulfur compounds, carbon monoxide, carbon dioxide, methane, and sulfur hexafluoride. Use PTFE tubing to attach a dual stainless steel or single polypropylene fitting on the bag to a Grab Air or Pocket Pump TOUCH. DOES NOT ship to Alaska, Arizona, California, Colorado, Hawaii, Idaho, Nevada, Oregon, Utah, Washington. Wyoming”
SKC Inc SURFACE SWYPE FOR ALIPHATIC IS
Surface SWYPE for Aliphatic IsocyanatesChemical contamination on workplace surfaces can result in significant skin exposure. Identification of areas and tasks for risk of dermal exposure is a critical element in a hazard assessment as required by OSHAs PPE standard. SWYPEs are a simple and sensitive technique to identify contaminated work sites where protective gloves and clothing must be worn. The use of colorimetric SWYPE systems compliment the use of urine testing in a worker education and training program for controlling employee exposure. DOES NOT ship to Alaska, Arizona, California, Colorado, Hawaii, Idaho, Nevada, Oregon, Utah, Washington. Wyoming”
SKC Inc Tedlar Sample Bags, 1 Liter, Single Polypropylene Fitting
SKC Tedlar 1 Liter Sample Bag with single polypropylene septum fitting. Fitting combines the hose/valve and the septum holder into one compact fitting. This bag is suitable for use with Small Vac-U-Chamber (231-940), (pkg/10). DOES NOT ship to Alaska, Arizona, California, Colorado, Hawaii, Idaho, Nevada, Oregon, Utah, Washington. Wyoming”
Ace Glass, Inc. Air sampling cane, funnel type with calibration port, 25mm OD
25MM SAMPLING CANE W/PORT
Electron Microscopy Sciences NIGHTSEA™ Fluorescence Adapter Battery and Charger
Compact battery pack that can run the Stereo Microscope Fluorescence Adapter (SFA) all day long. The battery enables truly portable operation so that you can set up demos anywhere or explore fluorescence in the field, without having to worry about plugging into the power grid.
Just plug the battery into the SFA base instead of the usual power connector. The battery has been tested at over 8 hours of continuous operation, and it will last even longer if you turn the system off when you don't need it. Plug it into the included charger overnight to recharge.
Thermo Scientific™ AerosolSense™ Cartridges
Used with the Thermo Scientific™ AerosolSense™ Sampler
Sensidyne™ Gilian™ Gilibrator-2™ Calibrator Kits
The Gilibrator-2™ calibration systems offer primary standard accuracy and pump performance validation for most commercially available air sampling equipment. Kits available using traditional wet cell method or with the piston cell assembly for dry applications. Existing Gilibrator-2 bases can be retrofitted to accommodate a piston cell.